Water Base PU Coating for Floor Waterproofing

Basic Info
Model NO.: CL-Coating
Certification: ISO14001, ISO9001
Substrate: Suit for All Kinds of Basement Materials
Components: Solvent
Formation Mechanism: Conversion Type
Weight: 20kg/Drum ,25kg/Drum
Temperature: -25 Degrees
CAS No: 75-13-8
OEM: Available
Spray Rate: >98% No Waste
Drying Time: Touch Dry: 8-12 Hours,Hard Dry: 24 Hours
Trademark: Nuode
Transport Package: with Pallets
Specification: 36 drums/pallet
Origin: ChinaProduct Description  Water base PU Coating for floor waterproofing
Polyurethane waterproof coating is a kind of liquid polymer waterproof material, suitable for dry and wet base surface construction, solidified into tough and elastic, non-toxic and tasteless waterproof film after coating. It is a new type of environmental friendly
waterproof material without solvent.
Water base PU Coating for floor waterproofing

Data sheet
 


 
Feature
 
PU waterproof membrane paint. It forms an elastic waterproof layer like rubber membrane after solidifying at normal temperature.
It enjoys many good features follow: 
1. Simple application, reliable performance, no joint gap.
2. Good cold &heat resistance, grease-proof &waterproof, aging, resistance, and corrosion resistance.
3. Firm adhesion and good elongation.
4. Good waterproofing, not dissolved in water, and it can be used together with cement and talc powder.
5. One component, in a barrel, namely uses once open. Avoid unstable product quality resulted from improper multicomponent mix proportion. 
6. Stable product performance, excellent functions of anti-aging, high and low temperature resistance.
7. Suitable for wet base and variable cross-section engineering with complex structure, perfect bonding performance.
8. Easy to operate, suitable for large areas of engineering construction and domestic maintenance and use. 
9. Pretty good cohesion with concrete, all kinds of pipes, plate and various waterproof sheets.
 
Usage
 
Water base PU Coating for floor waterproofing
1. Flat, stand, cant roof of building, lavatory bath room, swimming pool, gutter and afforest roof.
2. Underground construction: concrete floor, beam, shear wall, retaining wall, elevator shaft, etc.
3. Subway, tunnel, ditch, underground structure, all kinds of pools.
epoxy coating epoxy flooring polyurethane coating Note: 
1).the storage place should be dry, aerating and avoid water.
2).it is forbidden to contact fire because the easy is easy to burn.
3).stir the paint home y before application if Group II Materials is found to be of some precipitate.
4).the finished paint waterproof layer should be protected well to avoid damage before the application of protection layer. In case the paint layer is found to be damaged, cut down around the place to repair with paint.
 



 
Recommended dosage
 
Coating Thickness 1.0mm:1.3-1.5kg/m2
Coating Thickness 1.5mm:1.8-2.0kg/m2 
Coating Thickness 2.0mm:2.5-2.7kg/m2
 
advise:
1.underground construction thickness 1.2mm-2.0mm, normally 1.5mm. 
2.Toilet and bathroom thickness ≥1.5mm
3.exposed roof construction with  Several waterproofing coating every layer ≥1.2mm and 2.0mm. 
4.If you want to add a layer basement  in the middle  then under basement ≥1.0mm,uper the basement is ≥0.5mm
 
 
 Storage
 
Keep in ventilated, dry, damp places, Prohibit to contact fire, prevent sun and rain Shelf time:12month.
Package: 25 kg/barrel
PU waterproof membrane paint